Rubber Flat Belt

Rubber flat belt 1.plies:3-10ply 2:width:400-2200mm 3.thickness:8-30mm 4.Tensile Strength: 9-25MPA

Din Standard Rubber Flat Belt

Usage:

used for transferring nubbly, grainy, and farinose things at a high speed in a middle and long distance with higher load.

Standards:

GB/T7984-2001, DIN22102, BS490, AS1332, RMA, JISK6322, SABS1173 etc.

types:Besides General EP Belt, there are Fire-retardant type, Cold-resistant type, Wear-resistant type, Heat-resistant type, Acid and alkaline resistant type, Oil-resistant type, Antistatic electricity type, High-grade type and etc.

Models:

Ep80  Ep100   Ep125   Ep200  Ep250  Ep300   Ep400  Ep500 Ep600

The physical and mechanical properties:

1. The physical and mechanical properties of coverffig layer: please refer to the physical and mechanical properties of the common conveyer belt.

2. Tensile property of through thickness:a. The longitudinal tensile strength is not lower than the following nominal value:315 400 500 600 630 8OO 9OO 1000N/mmb. The through thickness elongation rate of the belt should not less than rate of trough thickness of the belt should no more than 4%.c. Straightness: no more than 25mm.d. plunger bond strength:

Index Description	Strength between layers	Cover layer and fabric layer
		Thickness of cover layer≤1.5mm	Thickness of cover layer >1.5mm
Sample average value	4.5N/mm	3.2N/mm	3.5N/mm

 

Fabric Material	Fabric structure		Fabric code	No.of fabric plies	Width mm	Lengthm	Cover thickness mm
	Warp	Weft
							Top	Bottom
Polyester canvas	Polyester	Nylon of Polyester	EP100	2-10	350-2000	10-400	2-12	1-5
			EP150	2-10	350-2000	10-400	2-12	1-5
			EP200	2-10	350-2000	10-400	2-12	1-5
			EP250	2-10	350-2000	10-400	2-12	1-5
			EP300	2-6	350-2000	10-400	2-12	1-5
			EP400	2-6	350-2000	10-400	2-12	1-5
			EP500	2-6	350-2000	10-400	2-12	1-5
			EP600	2-4	350-2000	10-400	2-12